Operation - AEG ATB48E1AW Benutzerinformation

66 www.aeg.com
14. Screw the remaining 2 screws on the
top side of the appliance with no
hinge.
15. Place the top cover on the appliance
and tighten the screws on the back.
Install the door equipment.

4. OPERATION

4.1 Switching on
Insert the plug into the wall socket.
4.2 Switching off
To turn off the appliance, remove the
plug from the power socket.
4.3 Temperature regulation
The temperature is regulated
automatically. However, you can set a
Wait at least 4 hours before connecting
the appliance to the power supply.
3.7 Installation of a door
handle
If there is a door handle separately
provided in a bag, you can install it as
follows:
1. Remove the screws from the holes
on the side of the door. Keep or
install the screw covers on the side
with a door hinge.
2. Match the handle holes with the
holes in the door and screw the
handle with screws previously
removed.
temperature inside the appliance
yourself.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.