Read Tags - Gallagher HR4 Benutzerhandbuch

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual

Read Tags

When the Reader is powered on, the main menu screen will be
displayed with the Read Tags icon
OK
Press the
To read a tag
Squeeze the trigger
the tag. A red light will show on the antenna when the reader is
attempting to read a tag.
A beep sounds, a vibration is felt in the handle, and the screen
updates with the Electronic ID tag information, to indicate a
successful tag read.
Important: If the Beeper and Vibrator have been turned off in
Settings, a successful tag read will only be indicated by the tag
information changing on the screen.
The fields on the Read Tags screen will vary depending on the
Session settings. See "Sessions" (p. 8).
The tag number displayed in the big ID field will vary depending on
your Tag Display setting. See "Tag Display" (p. 11).
Note: If using sorting for the session the sort group colour will
appear behind the read tag in the Big ID field.
Count or 'No:' The counter will increment each time a tag is read
to show the number of animals in the current session.
The 'No:' field on the lower left of the screen can be selected to
scroll back through the previous animals in the session.
If Record traits = NO
No soft key Tags counted in
assigned this session
12
button to start reading tags.
on your Reader and pass the antenna near
If Record traits = YES
Press soft key
below to view
animal history
and animal notes
highlighted.
Press soft key Press soft key
below to Edit below to Delete
trait values tag shown
Traits included
in this session