Environmental Protection - BGS technic 8551 Bedienungsanleitung

USE
Loosen the central screw of the belt pulley.
Insert the threaded insert (5) with the forcing
spindle (6) into the bridge (1).
Turn the extraction spindle (6) several turns
counter-clockwise to mount the puller bridge
(1) on the belt pulley (A).
Fasten the puller bridge (1) with two fixing
screws (3/4) on the belt pulley (A).
Insert the 12.5 mm (1/2 ") output square of a
ratchet / sliding handle into the inner square (2)
provided.
Turn the extraction spindle (6) clockwise while
holding the ratchet / sliding handle.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
NOTES
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed