Protecting The Environment; Technical Data - Black & Decker BCD002 Bedienungsanleitung

ENGLISH (Original instructions)
Problem Possible cause
Battery pack will not Charger not plugged
charge. in.
Surrounding air
temperature too hot or
too cold.
Unit shuts off Battery pack has
abruptly. reached its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage V
DC
No-load speed Min
-1
10
Possible solution
Max. torque
Plug charger into a work-
ing outlet.
Chuck capacity
Move charger and battery
Max Drilling capacity
pack to a surrounding air
temperature of above 40 Steel/wood
degrees F (45ºC) or below
Weight
105 degrees F (+40.5ºC)
Allow battery pack to cool
Charger
down.
Input voltage
Output voltage
Place on charger
and allow to charge.
Current
Approx. charge
time
Battery
Voltage
Capacity
Type
Level of sound pressure according to EN 62841:
Sound pressure (L
Sound power (L
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a
Black & Decker declares that these products described under
The Supply of Machinery (Safety) Regulations, 2008, S.I.
These products conform to the following UK Regulations:
The Restriction of the Use of Certain Hazardous Substances
BCD002
in Electrical and Electronic Equipment Regulations 2012, S.I.
18
0 - 360 / 0 - 1400
Nm
mm
mm
kg
90589867
V 230
AC
V 18
DC
mA 200
Hours 8
V
DC
Ah
) 64.5 dB(A), uncertainty (K) 5 dB(A)
pA
) 75.5 dB(A), uncertainty (K) 5 dB(A)
WA
2
) 0.9 m/s , uncertainty (K) 1.5 m/s
h,
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
BCD002 Drill
"technical data" are in compliance with:
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
2012/3032 (as amended).
BCD002
38
1-10
10/25
0.9 (with battery 1.3)
90590287-06 90634971
230 230
18 18
400 1A
3 - 5 1.5
BL1518
18
1.5
Li-Ion
2