Kit Contents; Model Assembly - Modster HOBBY Arrows 50mm T-33 Betriebsanleitung

Manual - T-33
Kit Content
Before assembly, please inspect the contents of the kit. The photo below details the contents
of the kit with labels. If any parts are missing or defective, please identify the name or part
number (refer to the spare parts list near the end of the manual) then contact your local shop.

Model assembly

Main wing installation
1. Attach the wing to the fuselage
using the includedscrews.
Note: Do not overtighten the screws.
Horizontal stabilizer installation
1. Install the horizontal stabilizer to
the rear of fuselage using foam safe
glue.
www.modster.at
2. Install the wing onto the fuselage
slot, with Y-harness going through
the hole as shown.
Note: Do not squeeze the wire leads.
2. Install the pushrod to the control
horn on the horizontal stabilizer as
shown.
17