How To Start Cooking - Pkm IF 4 Bedienungsanleitung

 Always lift your cookware, when you want to move it on the glass ceramic. Do
not push cookware as you may scratch the glass ceramic.
The base of cookware must have a minimum diameter relevant to the diameter of
the cooking zone you use the cookware on.

3.4 How to start cooking

1. Touch the ON/OFF sensor. When the power is on, a
beep sounds once; the display indicates -. The
appliance is in stand-by mode now..
2. Place a cookware on the desired cooking zone. Always
keep the bottom of the cookware as well as the
cooking zone clean and dry.
3. Select the power level by touching the
COOKING ZONE
4. Set the power level with the + and - sensor.
a. When you do not set a power level within 1 minute, the
appliance will switch off automatically. You have to start
at step 1 again.
b. You can change the power level whenever you want
while cooking..
The display indicates
 You have not placed the cookware on the correct zone, or
 You use unsuitable cookware, or
 You use cookware which is too small or not centred properly on the cooking
zone.
sensor. The indicator flashes.
↔ indicator of the power level alternately.
SELECTION OF
38