Operation; Hob And Control Panel - Pkm IF 4 Bedienungsanleitung

2. The voltage must meet the values on the nameplate.
3. The power cord must withstand the values on the nameplate.
4. When connecting do not use adapters, reducers and branching devices as they
cause overheating. RISK OF FIRE!
5. The power cord must not touch hot areas and its temperature must not exceed
75 0 C.
6. When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335). Read the information on the nameplate and the
connection diagram before connecting the appliance to the mains. The
electricity supply must be performed via a 16A automatic cut-out. If in doubt,
always contact the local building authorities and consult the relevant legal
provisions.
7. Do not bend or compress the power cord.
8. Check the power cord regularly. The power cord must be replaced by a qualified
professional only!

3. Operation

3.1 Hob and control panel

1 Max. 2000W-zone
2 Max. 1500W-zone
3 Max. 2000W-zone
4 Max. 1500W-zone
5 Glass panel
6 Control panel
35