English
6.2
Displaying the Charge State
► Press button (1).
The LEDs illuminate green for approx. 5 sec‐
onds to indicate the charge state.
► If the right LED flashes green: charge the bat‐
tery.
6.3
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
20.1.
There is a malfunction in the mower or battery.
7
Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
bol
lights up blue for about 3 seconds. The
®
Bluetooth
radio interface on the battery is
activated.
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
bol
flashes blue for six times. The Blue‐
®
tooth
radio interface on the battery is deacti‐
vated.
34
Radio
®
®
" LED next to the sym‐
®
" LED next to the sym‐
7 Activating and Deactivating Bluetooth® Radio Interface
8
Assembling the Lawn
Mower
8.1
Folding Up and Folding the
Handlebar
8.1.1
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
► Fold up handlebar (1), ensuring that cables (2)
are not trapped.
®
► Screw in quick-clamping devices (1).
®
► Close quick-clamping devices (1) in the direc‐
tion of handlebar (2).
Handlebar (2) is firmly attached to the lawn
®
mower and quick-clamping devices (1) lie flat
against handlebar (2).
8.1.2
The handlebar can be folded for space-saving
transport or storage.
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
Folding Up the Handlebar
Folding the Handlebar
0478-131-9950-C