Auto Update; Brightness - PERFECTPRO ROCKPRO Bedienungsanleitung

Auto update

The radio can receive the latest time information from either DAB + or FM signal, then
synchronise the current date/time of the radio.
1. Press the ON/OFF button to switch on the radio.
2. Press the MENU button to display current menu.
3. Rotate the TUNING/SEEK/SELECT knob to select "System settings" and press the
knob to enter system menu.
4. Then "Equaliser" will be displayed, rotate the TUNING/SEEK/SELECT knob to
select "Time/Date" and press the knob to confirm.
5. Rotate the TUNING/SEEK/SELECT knob to select "Time auto update" and press
the knob.
6. Rotate the TUNING/SEEK/SELECT knob to select
"Update from DAB" Radio will automatically synchronize the date/time from current
"Update from FM"
"No update"
7. Press the knob again to confirm and finish setting.
Note: If reception is good and you have selected the "Update from DAB" or "Update
from FM" option from Auto Update option, the time will be automatically updated. Time
synchronisation can take several minutes. The automatic time setting is always activated
when the radio is switched from standby to last played radio mode.

BRIGHTNESS

LCD brightness configuration
1. Press the ON/OFF button to turn on the radio.
2. Press the MENU button, and rotate the TUNNING control to the "System settings".
Then, press the TUNNING control;
Rotate the TUNNING control to the "Brightness".
3.
4. Press the TUNNING control to enter the LCD brightness adjustment menu.
5. Rotate the TUNNING control to select "Normal" for the LCD brightness level while
the radio is playing;
6. Or rotate the TUNNING control to select "Standby" to setup the brightness level of
the unit in standby mode.
7. Press the TUNNING control to confirm your choice.
Note: When in battery standby, the radio will be turned off to save power. At that
moment, the LCD will also be turned off. When the radio is connected to mains AC
power again, the last user setting will be applied again.
19
DAB station.
Radio will automatically synchronize the date/time from current
FM station.
Radio will stop updating date/time from any of the radio
stations.