BRAYER BR2401 Bedienungsanleitung Seite 21

2 The lid of the The steam pressure has
multicooker does not been relieved in the
not open multicooker.
The float valve is stuck
in the upper position.
3 Steam coming The silicone gasket
out from under is not installed on the
the lid of the inner lid.
multicooker
The silicone gasket is
damaged.
There are food remains
left on the silicone
gasket.
The lid is not completely
closed.
4 Steam leakage Food remains on the
from the float silicone o-ring of the
valve for more float valve.
than 2 minutes
Damage to the silicone
o-ring of the float valve.
Relieve the 5 The float valve
pressure in the does not rise
multicooker using
the methods
described in the
section «How to
properly open
the lid of the
multicooker».
Open the lid of
6 Constant steam
the multicooker
output from the
only when the
pressure limiting
steam pressure is
valve.
completely relieved.
Use a thin object to
push the float valve
down.
7 The multicooker
Install the silicone
does not turn on.
gasket on the
inner lid.
Replace the silicone
gasket.
Keep the silicone
gasket clean.
Open and close
the lid of the
multicooker again.
Clean the silicone
o-ring.
Replace the silicone
o-ring.
Insufficient amount of Observe the correct
food or water in the ratio of solid food
cooking bowl. and liquid volume.
Add water to the
bowl for normal
steam generation.
The float valve is Close the lid
blocked by the lid lock completely
The pressure limiting Turn the pressure
valve is in the steam limiting valve and
release position. make sure that it
is in the «Closed»
position.
The multicooker does Apply to the service
not maintain pressure. center.
The power cord plug Insert the power
is not inserted into an cord plug into the
electrical socket. electrical socket.
No voltage in the Test the electrical
electrical socket. socket by plugging
in a known good
electric appliance.
Malfunction of the Apply to the service
multicooker. center.
EN 21