Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PCM 7 Originalbetriebsanleitung

OBJ_BUCH-880-004.book Page 27 Monday, July 19, 2010 11:56 AM

Technical Data

Chop and Mitre Saw
Article number
Rated power input
No-load speed min
Laser type
Laser class
Weight according to
EPTA-Procedure
01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal)
see page 31.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dimension of suitable saw blades
Saw blade diameter
Blade thickness
Mounting hole diameter

Noise/Vibration Information

Measured sound values determined according
to EN 61029.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 106 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 61029:
Vibration emission value a
2
tainty K =1.5 m/s .
Bosch Power Tools
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 61029 and
PCM 7
may be used to compare one tool with another.
3 603 M01 2..
It may be used for a preliminary assessment of
W 1100 exposure.
The declared vibration emission level repre-
-1
4800
sents the main applications of the tool. However
nm 650
if the tool is used for different applications, with
mW < 1 different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
2
cantly increase the exposure level over the total
kg 8.0
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
/II
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
mm 190
in conformity with the following standards or
mm 1.4–2.5
standardization documents: EN 61029,
mm 30
EN 60825-1 according to the provisions of the
directives 2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
2
=3.0 m/s , Uncer-
D-70745 Leinfelden-Echterdingen
h
Leinfelden, 31.03.2010
English | 27
Dr. Eckerhard Strötgen
Head of Product
Certification
1 609 929 U75 | (19.7.10)