Before Commissioning - Bresser ClimaTrend Life Bedienungsanleitung

9 Humidity value
11 Date
13 Current time
15 Symbol for active daylight
saving time (DST)
17 Ice alert
19 Temperature trend arrow in-
dicator
21 Heat index
23 Alarm symbol for high
(HIGH) or low (LOW) tem-
perature (indoor)

7 Before commissioning

NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices,
the following points must be observed during commission-
ing.
1.
2.
3.
4.
12 / 60
Place the base unit (receiver) and sensor (transmitter)
as close together as possible.
Connect the power supply to the base unit and wait un-
til the indoor temperature is displayed.
Establish power supply for the sensor.
Set up/operate the base unit and sensor within the ef-
fective transmission range.
10 Graphical weather trend dis-
play
12 AM/PM information in 12-
hour time mode
14 Time signal transmission
symbol
16 Alarm symbol (bell) (Dual
alarm)
18 Heat alert
20 Temperature Level
22 Temperature value