Stahl EC-94 Serie Bedienungsanleitung Seite 9

INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
• Given the considerable weight of the system, use
an appropriate transport and handling system. The
staff must carry out the handling of the product in
compliance with the common accident prevention
standards.
• Before proceeding with installation, check the
supplied material to make sure it corresponds
to the order specification by examining the
identification labels.
• Equipment intended for installation in Restricted
Access Location performed by specialist technical
staff.
• The manufacturer declines all responsibility
for any damage caused by an improper use
of the appliances mentioned in this manual.
Furthermore, the manufacturer reserves the right
to modify its contents without any prior notice.
The documentation contained in this manual has
been collected and verified with great care. The
manufacturer, however, cannot take any liability
for its use. The same thing can be said for any
person or company involved in the creation and
production of this manual.
• Since the user is responsible for choosing the
surface to which the unit is to be anchored, we
do not supply the fixing devices for attaching the
unit firmly to the particular surface. The installer is
responsible for choosing fixing devices suitable for
the specific purpose on hand. Use methods and
materials capable of supporting at least 4 times the
weight of the device.
MNTCMPXHDC_2038_EN
• Contact the manufacturer for information on the
dimensions of the explosion proof joint.
• For all maintenance interventions, we recommend
you return the product to the laboratory that will
perform all required operations.
• This device is remotely controlled and may change
position at any time. It should be installed so that
no one can be hit by moving parts. It should be
installed so that moving parts cannot hit other
objects and create hazardous situations.
• This is a Class A product. In a domestic
environment this product may cause radio
interference. In this case the user may be required
to take adequate measures.
• To comply with the main supply voltage dips and
short interruption requirements, use a suitable
Uninterruptable Power Supply (UPS) to power the
unit.
7