AKG D 880M Bedienungsanleitung Seite 20

Microphone sound
becomes duller by and
20
Downloaded from www.Manualslib.com
5 Troubleshooting
Problem
1. Power to mixer and/or
2. Channel or master fader
3. Microphone is not con-
No sound.
4. Cable connectors are
5. Cable is defective.
6. Transmitter module is off
7. No/dead battery in
8. Receiver is off or not
1. Gain control on mixer or
Distortion.
2. Mixer input sensitivity
• Internal or external
by.
manuals search engine
Possible Cause
amplifier is off.
on mixer, or volume
control on amplifier is at
zero.
nected to mixer or
amplifier.
seated loosely.
or muted.
transmitter module.
connected to mixer.
transmitter module not
set correctly.
too high.
windscreen attenuates
high frequencies when
soiled.
Remedy
1. Switch power to mixer
or amplifier on.
2. Set channel or master
fader on mixer or vol-
ume control on amplifier
to desired level.
3. Connect microphone to
mixer or amplifier.
4. Check cable connectors
for secure seat.
5. Check cable and
replace if damaged.
6. Switch transmitter mod-
ule on.
7. Insert new/fully charged
battery.
8. Switch receiver on or
connect to mixer.
1. Set gain control to stop
distortion.
2. Insert 10 dB preattenua-
tion pad between micro-
phone cable and input.
• Clean internal or exter-
nal windscreen.