Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Important safety information for
the batteries
WARNING!
HEALTH HAZARD!
RISK OF EXPLOSION!
Keep batteries out of reach of small children. If a
battery is swallowed, you must seek medical
attention immediately. Batteries/rechargeable
batteries must always be inserted in the correct
polarity. If necessary, clean the battery and device
contacts. Never attempt to recharge non-
rechargeable batteries. Never short-circuit or
attempt to open batteries. Never throw batteries into
fire as they may explode. If the device will not be
used for an extended time period, remove the
battery and store the device in a dry and dust-free
area. Improper use of the battery can lead to
explosion or leakage. If the battery leaks, avoid
contact with skin, eyes and mucous membranes. Use
gloves. If you are exposed to battery acid, rinse the
affected areas with plenty of clean water and
immediately seek medical attention. Remove
discharged batteries from the device as they present
an increased risk of leakage.
Time setting
Carefully pull the crown out all the way. Turn the
crown clockwise or counter clockwise to set the
time. Press the crown back to the case to complete
the setting.
Shortening the band 2-LD4928-1
1. Your watch band is equipped with an additional
link with a fastener to simplify band shortening.
Open the fastener of the band and of the additional
link. Remove the additional link and re-close the
fastener of the band.
2. Shortening of the strap can also be achieved by
removing segments. Open the buckle and place the
wristwatch on a soft surface with the dial facing
downward. The segments that can be removed are
marked with an arrow. Push a pointed tool into the
opening on the side of the band and push the bolt
out of the band in the direction of the arrow. Pull out
the bolt (using pliers if necessary). The band can
now be disassembled. The strap can now be
disassembled. Remove as many segments as
- 3 -
Werbung
Inhaltsverzeichnis
