Timer Settings - Klarstein Basel Illumine Bedienungsanleitung

EN
28

TIMER SETTINGS

• There are up to 10 items for timer setting
• Each setting item has its date, power-on time and shutdown time
• The max. duration of each setting item is 23 hours 50 minutes
• The setting date for each item can be any day or days of a week
• The date in each setting item represents the date of power-on time
• If the shutdown time of the setting falls on the second day, it is unnecessary to set
the date – you just set the shutdown time.
View the timer setting
• Press the [TIMER SET] button.
• Press the [+] or [-] button to check the power-on time of the timer one by one.
• For checking the shutdown time, press the  button.
• Press the [+] or [-] button to continue viewing.
• For deleting the current item of setting, press [C] button to delete.
Steps for timer setting
(1) Select the settings of the serial number:
• Press the [TIMER SET] button, and the serial number starts blinking.
• Press the [+] or [-] button to change the serial number until you get the serial number
that you need to set or modify.
(2) Select date:
• Press [TIMER SET] button once again, and the cursor on the left side of day starts
blinking.
• Press the  or  button to move the cursor to the corresponding day, press the [+]
button to add the corresponding day, or press the [-] button to delete the day until
you have completed the selection of all dates.
(3) Set the start time:
• Continue to press the [TIMER SET] button, the hour starts blinking.
• Press the [+] or [-] button to adjust the hour.
• Continue to press the [TIMER SET] button, the minute starts blinking.
• Press the [+] or [-] button to adjust the minute.
(4) Set the shutdown time:
• Then press the [TIMER SET] button, the display is off, and the hour starts blinking.
• Press the [+] or [-] button to adjust the hour.
• Continue to press the [TIMER SET] button, the minute starts blinking.
• Press the [+] or [-] button to adjust the minute.