Troubleshooting; Specifications - Panasonic FZ-VEBN121 Bedienungsanleitung

Troubleshooting

If you experience any trouble while using this product, refer to the following
information for basic troubleshooting. If the trouble persists, contact your technical
support representative.
The unit or battery
does not charge.
Charging ends
quickly or does not
occur at all.

Specifications

Power supply input
External bus connector
LAN port
USB port *1
Dimensions (W ´ D ´ H)
Weight
Operating environment
*2
AC adaptor
*1 Operation of all USB-compatible peripherals is not guaranteed.
*2 <Only for North America> The AC adaptor is designed for use with power
sources that supply up to 240 V AC. The AC cord supplied with the AC
adaptor is designed for use with power sources that supply up to 125 V AC.
R The unit is not properly inserted. Make sure it is
inserted properly.
R The AC adaptor is not properly connected. Confirm
the connection.
R The terminals are dirty. Clean the terminals.
R The power may be off. Turn on the power switch
(page 10).
R The ambient temperature is too low or too high.
Charge the battery in environments with an ambient
temperature of 10 °C to 35 °C (50 °F to 95 °F).
R The battery may be worn out. Replace the battery
with a new one.
15.6 V DC, 7 A
9 pins ´ 4
(10Base-T/100Base-TX) ´ 2
USB 2.0 ´ 4
Approx. 466 mm ´ 212 mm ´ 95 mm
(18.4 in. ´ 8.4 in. ´ 3.8 in.)
(excluding protrusions)
Approx. 2.0 kg (4.4 lb)
0 °C to 40 °C (32 °F to 104 °F)
30 % to 80 % relative humidity
Input: 100 V to 240 V AC, 50 Hz/60 Hz
Output: 15.6 V DC, 7.05 A
13