nufacturer, its service agent or suitably qualified persons:
- Before accessing the connection and installation, the current
must be disconnected on all poles (fuse in fuse box).
- Children shall not play with the appliance.
- Ensure that the fan is switched off from the supply mains before
service and maintenance.
- The electrical connection and electrical maintenance of this fan
may only be carried out by a trained electrician, a skilled electri-
cian or an appropriately qualified person.
- The voltage details on the rating label are to conform with the
available mains voltage.
- Only operate the ceiling fan when completely assembled!
- WARNING! The mains connection requires a two-pole isolating
switch with a contact opening width of at least 3 mm. The dis-
connecting device must be integrated into the fixed wiring accor-
ding to the valid technical regulations.
- The electrical safety of the fan is only guaranteed if the earthing
system of the building installation is installed according to regulations
and connected to the fan.
- The mains connection to which the fan is connected must comply
with the applicable local standards.
- Choose a safe place for installation and make sure that there are
no objects within the area of rotation.
- The construction and fixture of the holder and ceiling is to be able
to bear 4 times the weight of the fan when being moved.
- None of the fan blades are to be less than 2.3 m from the ground.
- Before first using after the setup, all electrical and mechanical
connections are to be checked in order to prevent any fall, fire or
electric shock.
8