Mounting - Sonnenkönig SIGA Bedienungsanleitung

03 - MOUNTING

1. Place the heater mounting part A on a rod
with a diameter between 25 mm and 60 mm.
2. Plug the mounting part B onto the mounting
part A from bottom to top.
3. Turn the fastening screw until mounting part
A is fastened to the pole.
4. When you start the heater, simply hold the
small handle at the end of the heater and
push it upwards.
5. When you no longer need the heater, proceed
as follows.
• With your right hand, push the heater up.
• With your left hand, push the small silver
button on the end.
• With your right hand, push the heater down.
1.
2.
3.
4.
5.
3
2
1
EN
35