Silvercrest SHBR 560 B1 Bedienungsanleitung Seite 15

Press the hard floor switch
The LED on the hard floor switch
Fig. 12
Before each use, press the cleaning solution switch
continuous spray function and add cleaning solution to the rotary brush
it is ready for operation (see fig. 14). The cleaning solution display
alternately blue when the continuous spray function is activated or the cleaning
solution switch
Fig. 14
Activate the continuous spray function during cleaning with both forward and
backward movements with the appliance. This way, the cleaning solution is
evenly applied to the hard floor via the rotary brush
Press the cleaning solution switch
continuous spray function.
NOTE
► For stubborn soiling, move the appliance over the soiled areas several times
and activate the continuous spray function.
Press the hard floor switch
■ 12 │ GB │ IE
r
to switch the appliance on (see fig. 13).
r
Fig. 13
t
is being held down (see fig. 15).
2 x
Fig. 15
t
r
again to switch the appliance off (see fig. 13).
lights up blue.
t
twice briefly to activate the
6
.
twice briefly again to deactivate the
6
so that
w
flashes
SHBR 560 B1