Part List; Guarantee Claims And Warranty; Ec Declaration Of Conformity - Landmann Triton PTS 3.0 Montageanleitung

6

Part list

Item Qty. Part name
1 1 Side frame, left
2 1 Side frame, right
3 1 Cart base
4 1 Rear panel
5 1 Front panel strut, top
6 1 Grease catchment tray, right
7 1 Grease catchment tray, left
8 4 Rollers
9 1 Front panel strut, bottom
10 1 Barbecue unit, pre-assembled
11 2 Side rack bracket, front
12 2 Side table bracket, rear
13 1 Side table, left
14 1 Side table, right
15 1 Lower cupboard door, right
16 1 Lower cupboard door, left
17 1 Door handle
18 3 Adjusting knob
19 3 Flame tamer
20 1 Lid handle
21 2 Cooking grill
22 1 Warming rack
23 1 Grease tray
24 1 Fat catcher tray
25 1 KIT (Regulator & Hose set)
1 Screw set with assembly material

Guarantee claims and warranty

Your LANDMANN barbecue left the factory
in a technically flawless condition.
For this reason, in addition to your statutory warranty claims
LANDMANN also offers an extended quality and durability
warranty against rusting through on the following parts:
Burner
Cooking grill/plate
Any warranty and guarantee claims shall become void in the
event of improper use of the barbecue or the use of non-approved
fuels. Discolouration, rusting or slight deformation of parts
exposed directly to the flames (cooking grill, hotplate, burner,
flame tamer, etc.) do not impair the function of the barbecue
and, as such, do not form a basis for any warranty claims.
Please retain your receipt in case you need to make a warranty claim.
Placement of the gas cylinder during use
The gas cylinder can be stored in the base cabinet during use, provided
that it does not exceed the specified maximum dimensions (see page
3). Place the gas cylinder in the recess provided for this purpose in
the base.
Larger gas cylinders can also be set up outside of the barbecue as long
as they do not exceed the maximum height of 700 mm.
EC – Declaration of Conformity
We, LANDMANN GmbH & Co. Handels-KG, hereby declare that the
gas appliance described here complies with EU regulation 2016/426.
Conformity has been verified by a type examination according to EN
498:2012.
The type examination was carried out by the notified body TÜV
Rheinland (1008).
Product identification number: 1008 CP2816
Please contact our service department for further information.
5 years
10 years