Mode Switches - SecaCam HomeVista Bedienungsanleitung

4. Getting started

4.1 Mode switches

Note: Remove the protective film from the screen of the camera by pulling it
at the overhanging green tab - a little force might be required.
I. OFF/ON
on.
II.
Photo/Video
tween photo or video mode is done via the menu (see page 15).
III. 25/56
photographs turn out too bright, set this switch to position '25'
(LEDs), for larger areas or if your night photographs turn out too
dark select position '56' (LEDs).
IV. Push notification toggle (ON/OFF): When you switch the toggle to
the 'ON' position, the camera connects to mobile networks. The
process of joining the network can take 15-20 seconds. When
you switch the toggle to the 'Off' position, the camera disconnects
from mobile networks.
To avoid lag between your camera and mobile networks, turn the
mobile function on only after the camera is configured. Camera func-
tions such as, making changes to your settings or viewing photos,
will be noticeably faster when the push notification toggle is in the
'Off' position.
switch: Set this switch to "ON" and the camera will turn
switch: This switch has no function. Switching be-
switch: If a smaller area has to be monitored or your night
51