With Ground Coffee - SEVERIN KA4813 Bedienungsanleitung

3. Set the grind regulator
Turn the regulator clockwise towards "–" to grind the coffee finer.
•
• Turn the regulator anticlockwise towards "+" to grind the coffee
coarser.

5.2 With ground coffee

1. Press the "OPEN" button
swing-out filter
.
4
2. Place the filter insert
3
3. Place a disposable coffee filter in the filter insert
GB
TIP
You can also use the permanent filter
a disposable coffee filter.
4. Add the ground coffee to the disposable coffee filter. Use the supplied
measuring scoop for this purpose. Refer to the following table for
6
the required amount:
Number
of cups
2
4
6
8
10
5. Fit the filter ring onto the filter insert
1
6. Close the swing-out filter
28
to the required grind.
12
on the side of the appliance to open the
11
in the swing-out filter
.
4
.
3
instead of
2
Number of scoops
1½ – 2
3 – 4
4½ – 6
6 – 8
8 – 10
.
3
.
4
7. Remove the coffee jug.
TIP
Fill the coffee jug only up to the required number of
cups as all the water is used for brewing. One cup is
approx. 125 ml.
8. Fill the coffee jug up to the mark for the required number of cups.
5
9. Open the water tank .
13
10. Pour the water into the water tank
indicator .
9
11. Close the water tank .
13
12. Place the coffee jug on the hotplate
5
13. Plug the power plug into the socket. Press the "
8
 The appliance switches on automatically. The time and the current
settings are shown on the display.
14. Press the " " button to switch off the grinder.
 The "
" button turns blue.
15. Press the " " button.
 The "
" button lights up. The appliance begins to brew the coffee
and the " " symbol appears on the display.
16. Wait until the appliance beeps 3 times and the "
 The coffee is ready.
TIP
Unless you press the " " button after the
coffee is made, the coffee will be kept warm for
the period defined in ►" Set switch-off time" on
page 25.
. Check the water level at the level
13
.
7
" button.
" symbol goes out.