List of Error Messages
List of Error Codes without Messages
If a job or operation does not complete successfully, check the error code, and perform the
necessary operations according to the error code displayed. You can check the error code on
the Details screen under [Log] from the System Monitor screen. (See "Job Details," in the
Reference Guide.)
3
If a send, receive, or fax job does not complete successfully, the error code is printed in the
Results column on the Activity Report and Send Report. (See "Printing Communication
Reports," in the Sending and Facsimile Guide.)
Perform the necessary procedures according to the error code.
NOTE
If a send job is cancelled, <STOP> is printed in the Results column on the Send report.
# 001
Cause 1
Remedy
Cause 2
Remedy
# 009
Cause 1
Remedy
Cause 2
Remedy
3-6
List of Error Messages
Differently sized originals were scanned, and the Different Size Originals mode was not set.
Place your originals, specify the Different Size Originals mode, and try scanning again.
Differently sized originals were scanned in the 2-Sided mode, and the Different Size Originals
mode was not set.
Place your originals, specify the 2-Sided and Different Size Originals modes, and try
scanning again.
There is no paper.
Load paper. (See "Paper Drawers," in the Reference Guide.)
The paper drawer is not inserted correctly into the machine.
Insert the paper drawer properly. (See "Paper Drawers," in the Reference Guide.)