Downloaded from
www.Manualslib.com
Hardware Installation
The following diagrams provide you a basic installation for your
MSI MP54G5 Wireless 11g MiniPCI Card. The instruction
below is suitable for most computers with MiniPCI slot. For
more information about the MiniPCI module, please refer to
your computer's manual.
Installing MSI MP54G5 Wireless 11g MiniPCI Card:
1.
Locate the MiniPCI slot on the mainboard.Place your
MSI MP54G5 Wireless 11g MiniPCI Card over the
MiniPCI slot (at an angle of 30 degrees). Then, gently
insert it into the slot until the golden finger of the card
gets fully inserted.
2.
Press down the card, and the retaining clips (on two
sides of the slot) will lock onto the notches of the card.
3.
Connect the attenna's cable to the connector on the card.
manuals search engine
8