Filling With Water; Operation And Use; Switching The Appliance On/Off - Beem Pyramid A10 Bedienungsanleitung

EN
Symbol Meaning
Blue indicator lamp lights up: appliance is heating
Red indicator lamp (11) lights up: refill with water, descale,
boil-dry protection is active
Warm water:
Hot water;
Intermittent boiling:
Boiling
water:

Operation and use

Switching the appliance on/off

Turn the rotary switch (9) anticlock-
‹
wise until it stops and you hear a
distinct "click". The appliance is then
switched off.
Turn clockwise to switch on the ap-
‹
pliance. This is also indicated by an
audible "click".
The settings and temperatures can be
‹
obtained from the table in the section
Rotary switch (page 21).
12
11
BEEM - Elements of Lifestyle
Rotary switch (9)
9
Water temperature: approx. 55 °C – 65 °C
Water temperature: approx. 85 °C – 95 °C
Water temperature: approx. 100 °C

Filling with water

For this, proceed as follows:
Take the teapot (4) off the water tank.
‹
Remove the lid of the water tank (16).
‹
Fill the water tank (7) with water. Pay
‹
attention to the maximum level mark
(15).
Put the lid of the water tank (16) onto
‹
the water tank (7).
Put the teapot back onto the appli-
‹
ance.
Pyramid A10
21