Removing and mounting the attachments
• Take care not to injure hands, etc., with the blade
when removing or mounting the attachment.
Removing the attachment
►
Hold the main body
securely and pull the
attachment out upward
and remove it from the
main body.
• Hold the rib (
) part
a
securely and remove
the skinguard
attachment.
Mounting the attachment
►
Mount the attachment to
the main body until it
clicks.
• If the attachment is not
attached correctly, it
may shift and end up
cutting too much during
use.
14
PB017156 - ER-GK80
_(01GB)_12-05-18.indd 14
Without attachment
Apply light pressure and slowly move the main
body against the direction of hair growth.
• To trim navel hair, lay the blade flat against your skin
and then move the main body in a gliding motion.
This allows you to trim hair down to a length of
a
approximately 0.1 mm.
• It does not matter which side of the blade you lay
against your skin.
Skinguard attachment
Lightly apply the edge of the skinguard attachment
against your skin and then slowly move the main
body.
Click
• This allows you to safely trim hair down to a length of
approximately 2 mm.
2018/12/6 16:47:21