Loading Paper - Citizen CT-S601 II Benutzerhandbuch

3.1 1

Loading Paper

1. Press the cover open lever while the pow er is on.
2. Open the paper cover.
3. Load the paper roll so that the printable side of the paper is facing down, as shown
by arrow A.
4. Pull a few cm of pap er straigh t out in the directio n of arrow B.
5. Close the paper cover in the direct ion of arrow C until you hear a click. Paper is fed
and cut automatically , if the factory settings are set.
CAUTION
 Always use the specified types of paper rolls.
 Confirm that the paper roll is set correctly.
 If the paper is skewed and not coming straight out of the paper cover, open it and
straighten the paper.
 Always pull a few cm of paper straight out of the printer if you open the paper cover
while paper is loaded.
 Press on the center of the paper cover to close it securely.
 Be careful of paper cuts while loading the paper.
 Do not touch the print head, manual cutter, or auto cutter while the paper cover is
open. Doing so may cause a burn or cut.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Refer to 5.3 Manual Setting of Memory Switches
— 36 —
V10 CONSUMIBLES S.L.