The filter system protects the pump against remnants of food and other objects.
These remnants can clog the filters after a while. Clean the filters regularly.
Remove large food particles after a programme has ended by rinsing the filter.
When you remove the coarse filter, you can remove all filters of the system.
Remove any remnants and clean the filters with flowing water.
We recommend to clean the entire filter system once a week.
Do not knock against the filters as you will damage them. Your appliance will
not work properly if the filters are damaged.
Always install the filters properly.
Improperly installed filters may damage the appliance and dishes.
Open
1
Turn the micro filter (anticlockwise).
2
Lift up the micro filter.
3
Lift up the main filter
For reinstallation proceed in reverse order.
Spray arms
Clean the spray arms regularly as chemicals and minerals may clog the nozzles
and bearings.
Hold the middle of the spray arm and pull it upwards.
Rinse the spray arm with flowing water and reinstall it.
Control panel
Clean the control panel with a soft damp cloth and dry it carefully.
60