Safety Instructions - Teka HLC-Serie Bedienanleitung

3. Touch
or
display starts flashing, then press
indication '00:00' will appear on the display.
4. Select the cooking end time by touching
or . Next, a double beep will sound and the
current time will be displayed on the display.
5. Select a cooking function and temperature.
The oven will remain disconnected with the
and symbols lit up. The oven is now
programmed.
6. When it is time to start cooking, the oven will
turn on and will operate for the programmed
cooking time.

safety instructions

saFETY CHILD LoCK
This function can be selected at any time while
using the oven.
To activate the function, touch and hold the
and keys at the same time for sever-
al seconds until you hear a beep and the
symbol appears on the display. The clock/
timer is locked.
If the oven is off and you activate the child
safety function, the oven will not work even if a
cooking function is selected.
If this function is activated while you are cooking,
it will only lock the electronic clock/timer settings.
To disable the function, press the
keys at the same time for several seconds until
you hear a beep.
MaNUaL DooR LoCK
available in pyrolytic models only.
This function allows the oven door to be locked.
26
User's Guide
until the symbol on the
7. While cooking, the cooking time remaining
will be displayed and the
. The
flash slowly.
8. When the cooking time is up, the oven will
turn off, a buzzer will sound, and the
symbol will flash quickly.
9. Touch any sensor to stop the buzzer and
turn off the
switch on again.
10. Set the controls to the
off the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
This function can only be selected when the
oven command functions are set to the rest
position
To activate/deactivate the door lock, follow
these steps:
1. Touch
display starts flashing.
The current door lock status will be displayed:
"On" if it is active and "Off" if deactivated.
2. Touch
inverted: if the door is unlocked, it will lock
and
and vice versa.
3. Once the door has been locked/unlocked,
the new locking status of the door will ap-
pear on the display.
In the event that the locking system is ac-
tive, the
on the display.
symbol. The oven will
or
IMpoRTaNT
.
or until the
, and the status of the lock will be
symbol will appear constantly lit
symbol will
position to turn
until the
to
symbol on the