Counting - Denver Instrument TP Serie Betriebsanleitung

Counting

Purpose
With the Counting program you can
determine the number of parts that
each have approximately equal
weight.
Preparation
§ Configure the Counting application
in the operating menu:
See "Configuring the Balance"
Menu code: 2. 1. 4
Example
Determine an unknown piece count; weigh the preset reference sample quantity
Menu: Application program: Counting (menu code 2. 1. 4)
Reference sample quantity: 20 pcs (menu code 3. 3. 3)
Step
1. Tare the balance
2. Display the reference sample
quantity (here: 20 pcs)
3. Place the reference sample
quantity (20 pcs) on the balance
(here: 66 g)
4. Start the application; if the print [FUNCTION]
format is set to include data
ID codes, the following piece
weight is printed
5. Weigh uncounted parts
(here: 174 pcs)
6. Display weight
7. Display quantity
8. Unload the balance
9. Delete the reference value
10. Repeat the procedure starting from step 5, if desired.
Reference sample quantity:
$
Code 3. 3. 1
Code 3. 3. 2 10 pcs (factory setting)
Code 3. 3. 3 20 pcs
Code 3. 3. 4 50 pcs
Code 3. 3. 5 100 pcs
$ Storage parameter
(display accuracy for counting)
Code 3. 4. 1 Standard resolution
Code 3. 4. 2 With 10 times higher
See also "Configuring the Balance"
Key (or instruction)
[TARE]
[FUNCTION]
>2 sec.
[FUNCTION]
[FUNCTION]
[CF]
5 pcs
(factory setting)
resolution than stan-
dard
Display/Printout
0.0
g
ref 20
(briefly)
+
66.0
g
+
20
pcs
wRef + 3.300 g
+
174
pcs
+
574.2
g
+
174
pcs
0
pcs
13