Troubleshooting
GB
IE
In this chapter you will receive important informa-
tion for malfunction localisation and malfunction
remedies.
Malfunction causes and remedies
The following table will help with localising and
remedying minor malfunctions:
Defect
The wax melter
tip
get hot.
NOTICE
►
Cleaning
CAUTION
Damage to the appliance!
►
►
♦
Storage
If you do not intend to use the appliance for an
extended period of time, remove the batteries.
Store all parts of the Laminate/Parquet Repair Kit
in the storage case and at a clean, dry location
out of direct sunlight.
8
Possible
cause
The batteries
have been
inserted incor-
rectly.
does not
The batteries
are discharged.
If you cannot solve the problem with the
aforementioned solutions, please contact the
Service Hotline (see chapter Service) .
Ensure that, when cleaning it, no moisture can
penetrate into the appliance, so as to avoid
irreparable damage to it.
Do not use chemical or abrasive cleaning
agents. These could damage the housing.
Clean the wax melter
tip
with the cleaning cloth
they have cooled down.
Solution
Insert the bat-
teries as per
the depiction
in the battery
compartment .
Insert two
new batteries.
and the wax melter
only when
PLPRS A1