Changing The Blade; Storage; Waste Disposal And Environmental Protection; Replacement Parts / Accessories - FLORABEST FRM 1800 B2 Originalbetriebsanleitung

GB IE

Changing the Blade

If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade is
damaged or showing signs of imbalance,
it must be replaced (see chapter on "Spare
Parts").
1. Switch off the equipment, discon-
I
nect the plug and wait until the
blade stops.
2. Turn the equipment over.
3. Use sturdy gloves and hold the
blade firmly (23). Turn the blade
screw (22) anticlockwise off of
the motor spindle (24) using a
screwdriver (A/F width13).
4. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened firmly.

Storage

• Keep the equipment dry and out of
reach of children. Loosen the wing nuts
and fold down the handle bar so the
equipment takes up less space. Ensure
that the cable is not caught.

Replacement parts / Accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone (see
"Sercice-Center" Page 16). Please have the order number mentioned below ready.
Item Description .......................................................... Product No.
4 Grass bag ......................................................................... 91103875
I
23 Spare blade ...................................................................... 13700303
14
•
•
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal
and environmental
protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in an
environmentally correct manner - bring it to
a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a
recycling
with them.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.
www.grizzly-service.eu
Allow the motor to cool before storing
the equipment in a confined space.
Do not cover the equipment with nylon
bags as moisture could build up.
centre when you have finished
Machines do not belong with do-
mestic waste.