Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wear gloves when handling the
blade.
Switch off the equipment before all
maintenance and cleaning work,
disconnect the plug and wait until
the blade stops.
There is a risk of injury.
General Cleaning and Main-
tenance Work
Do not hose down the lawnmower
with water.
•
Always keep the equipment clean. To
clean, use a brush or cloth but no de-
tergent or solvent.
•
After mowing, use a piece of wood
or plastic to remove adherent plant
remains from the wheels, ventilation
holes, ejection hole and blade area.
Do not use hard or pointed objects, as
these may damage the blade.
•
Oil the wheels from time to time.
•
Before each use, check the lawnmower
for obvious defects such as loose, worn
or damaged parts. Check that all nuts,
bolts and screws are sitting firmly.
•
Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.
Changing the Blade
If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade is
damaged or showing signs of imbalance,
it must be replaced (see chapter on "Spare
Parts").
I
1. Turn the equipment over.
2. Use sturdy gloves and hold the
blade (18) firmly. Turn the blade
screw (17) anticlockwise off of
the motor spindle (19) using a
screwdriver (A/F width13).
3. Install the new blade (18) in the
reverse order. Ensure that the
blade (18) is positioned correctly
and the screw (17) tightened
firmly.
Storage
•
Keep the equipment dry and out of
reach of children. Loosen the wing nuts
and fold down the handle bar so the
equipment takes up less space. Ensure
that the cable is not caught.
•
Allow the motor to cool before storing
the equipment in a confined space.
•
Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Disposal /
Enviromental
Protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in an
environmentally correct manner - bring it to
a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a
recycling
centre when you have finished
with them.
Machines do not belong with do-
mestic waste.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.
GB
IE
11
Werbung
Kapitel
Inhaltsverzeichnis
