Technical Data; Noise And Vibration Data; Vibration Information - Worx WX424 Originalanleitung

TECHNICAL DATA

Description wORx Mini multi-function saw
Type wx424 wx424.1 wx424.2 wx424.3 (4-Designation of machinery,
representative of saw)
Voltage
Power input
No load speed
Blade diameter
Cutting capacity
Protection class
Machine weight

NOISE AND VIBRATION DATA

A weighted sound pressure
A weighted sound power
K &K
PA WA
8
Wear ear protection when sound pressure is over

VIBRATION INfORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
wARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
wARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually doing the job. This may
Mini multi-function saw
Vibration emission value a
Uncertainty K = 1.5m/s²
230-240V~50Hz
310W
2800/min
76x10mm
22mm
/II
1.5kg
L 82dB(A)
PA
L 93dB(A)
WA
3dB(A)
80dB(A)
= 6.01m/s
2
h
EN