Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Additional notes on use
a)
Always switch the device off and disconnect it from the
power supply when not in use.
b)
Never operate the device for more than two hours at a
time and allow 15 second intervals between each
lamination process.
c)
Before you store the device in the box, let it cool for at
least 30 minutes.
d)
For best results, use the laminator at normal room
temperature (10-35 °C).
e)
Ensure that there is no dirt on the outside of the laminating
fi lm in order to protect the device from impurities.
6. Caring for the device
Any dirt stuck to the outside of the fi lm can be deposited on the
rollers of the device during the lamination process.
Excessive adhesive may run next to the fi lms after they are
pressed together and become stuck.
To extend the service life of the laminator and maintain the
quality of the lamination process, it is important to clean the
device regularly.
6.1 Cleaning the rollers
a)
Switch the device on as previously described.
b)
Fold a DIN A4 piece of paper and push it into the device
with the folded side fi rst.
c)
Repeat this again until there are no more traces of glue on
the paper.
d)
If this method does not remove the dirt, we recommend
using special cleaning cloths from our product range.
6.2 Cleaning the machine
a)
Switch off the device and disconnect it from the power
supply.
b)
When the laminator has cooled down clean the outside
with a soft cloth.
6.3 Specifi cations
•
Number of rollers:
•
Mains connection:
•
Max. foil thickness:
•
Max. lamination width:
•
Max. lamination height:
•
Warm-up time:
•
Lamination speed:
7. Support and contact information
If the product is defective:
Contact your retailer or Hama Product Consulting if you have
any product claims.
Internet/World Wide Web:
Product support and product information are available at
www.hama.com.
Support Hotline – Hama Product Consulting:
Phone: +49 (0)9091/502-115
Fax +49 (0) 9091 / 502-272
E-mail: produktberatung@hama.de
Two
220-240 V~
80 µm
238 mm
0.4 mm
5-10 minutes
300 mm/min.
5
Werbung
Inhaltsverzeichnis
