Wi-Fi Setting Of Bluetooth Remote Control - SELFSAT -IPD30A Bedienungsanleitung

• Wi-Fi setting of Bluetooth remote control

√ SAT>IP Wi-Fi Dongle and Bluetooth remote control packed in a
box are 1:1 paired for initial operation. No need further pairing
except case of factory reset.
1
① Select "Setting" > "Set up Wi-Fi" on the right bottom at main screen
using Bluetooth remote control.
2
Find and select Wi-Fi AP's network ID in Wi-Fi list available.
②
If the selected Wi-Fi is locked, input password to join to the network.
③
To add Wi-Fi network manually to the list, select "Add Wi-Fi
√
network" at the bottom to pop up related screen → Input Wi-Fi
name → Select security type among None, WEP and WPA/WPA2
(recommended) → Enter password → press "Connection"
button. If there is no security option, input Wi-Fi name and press
"Connection" button.
Wi-Fi AP must be the one connected from SELFSAT>IP antenna
√
which is pointing the satellite.
SAT>IP function is fully manageable by Bluetooth remote
√
control but other entertainment functions and setting of the
device will need "SELFSAT SAT>IP RCU", relative mobile application.
3
ENGLISH - 8