Electrolux GA55LIWE Benutzerinformation Seite 10

10 www.electrolux.com
German de‐
grees (°dH)
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill notification active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
How to set the water softener
level
Make sure the appliance is in user mode.
1. Press Program.
• The indicators
• The indicator
• The display shows the current
setting: e.g.
2. Press Program repeatedly to change
the setting.
3. Press on/off to confirm the setting.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot
rinse phase.
When the rinse aid chamber is empty,
the rinse aid indicator is turned on
notifying to refill rinse aid. If the drying
results are satisfactory while using multi-
tablets only, it is possible to deactivate
the notification for refilling rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
French de‐
grees (°fH)
<7
are off.
still flashes.
= level 5.
mmol/l
<0.7
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press Start.
• The indicators
• The indicator
• The display shows the current
, and
2. Press Start to change the setting.
3. Press on/off to confirm the setting.
6.4 The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Zeitvorwahl.
• The indicators
• The indicator
• The display shows the current
2. Press Zeitvorwahl repeatedly to
change the setting.
Clarke de‐ Water softener
grees
< 5
are off.
flashes.
setting.
– = the rinse aid empty
notification is deactivated.
– = the rinse aid empty
notification is activated.
and
still flashes.
setting: e.g. = level 4.
– The levels of rinse aid range
from 0A to 6A where level 0A
means no rinse aid is used.
level
2)
1
, and
still
,
are off.