Adjustment - SPORTSTECH SX400 Benutzerhandbuch

• To adjust the seat height, slacken the spring knob on the vertical post stem on the main frame
and pull back the knob. Position the vertical seat post for the desired height so that holes are
aligned, then release the knob and retighten it.
• To move the seat forward in the direction of the handlebar or backwards away from it, loosen the
adjusting knob and washer and pull the knob back. Slide horizontal seat post into desired positi-
on. Align holes and then retighten the adjusting knob.
• To adjust the handlebar height, slacken the spring knob and secondary knob and pull both knobs
back. Slide the handlebar post along the housing on the main frame to the desired height and,
with the holes aligned correctly, tighten the spring adjusting knob and then the secondary knob.
Adjusting the Tension:
Increasing or decreasing the tension allows you to add
variety to your workout sessions by adjusting
the resistance level of the bike.
To increase tension and increase resistance (requiring
more strength to pedal), turn the Emergency
Brake & Tension Control Knob (#30) to the right.
To decrease tension and increase resistance (requiring
less strength to pedla), turn the Emergency
Brake & Tension Control Knob (#30) to the left.
Using the Emergency Brake Function:
The same knob that allows you to adjust the tension of
the bike also doubles as the Emergency
Brake. Use this safety feature in any situation where you
would need to get off the bike and/or
stop the bike's flywheel.
To use the Emergency Brake function in any situation
you would need it in, firmly press down on
the Emergency Brake & Tension Control Knob (#30).

ADJUSTMENT

35