ZENEC ZE-MC2000 Bedienungsanleitung Seite 92

tROUBLEShOOtING
Characters
Audio output connection is not
correct.
The volume level is set to the
minimum level.
No sound – or it's
hard to hear. The speakers have been damaged. Check the speakers.
The audio channel outputs are not
balanced.
The speaker cord is contacted with
the bodywork.
Piratic disc is used.
The speakers power rating does
Poor sound
not fit into the unit output power.
quality or sound
The speakers are connected
distortion.
incorrectly.
The speaker cord is contacted
with the bodywork.
User preset
information is ACC and BATT are connected
lost when ACC incorrectly.
is off.
All manuals and user guides at all-guides.com
Causes
Correct the connection according
to connections diagram.
Adjust the volume to the optimum
level.
Adjust the balance of audio
channel outputs.
Use insulating cord for connection.
Use original copy disc.
Change the speakers.
Correct the connections according
to connections diagram.
Use insulating cord for connection.
Correct the connections according
to connections diagram.
Remedies
92