Basic Operations; Turn On/Off Unit Power; Mute; Adjust The Volume - ZENEC ZE-MC2000 Bedienungsanleitung

BASIC OPERAtIONS

TuRN oN/oFF uNiT PoWER

Turn on unit power
■ Press the [Power] key on the front panel or on the remote
control.
■ The unit goes back to the last status after power on.
Turn off unit power
When the unit is running, press and hold the [Power] key on the
front panel or press the [Power] key on the remote control.

MuTE

To mute audio outputs, press the [MUTE] key on the front panel or
on the remote control.

NoTE:
■ Doing the operation above again or adjusting volume will release
muting.
■ Mute icon ( ) winks on the TFT during muting.

adjusT ThE VoluME

To adjust the volume level, rorate the [VOL.SEL] knob on the
front panel or press the [VOL+/-] key on the remote control. The
adjustable range of volume is from 0 to 40.
It's possible to adjust the volume for bluetooth and the navigation
mode separately and independent of the volume from the other
playing sources. The adjusted volume will be saved automatically
and is set as the starting volume.
All manuals and user guides at all-guides.com
60

oPEN souRCE MENu

■ Press the [SRC] key on the front panel or on the remote control
or touch the left top corner of the TFT monitor.
sElECT oNE iTEM/CoNFiRM
■ Press the [Left]/[Right] key and rotate the [TUNE.ENT] knob on
the front panel or press the [Up]/[Down]/[Left]/[Right] key on the
remote control to select one item.
■ Press the [TUNE.ENT] knob on the front panel or press the
[ENTER] key on the remote control to confirm.

PlaYiNg souRCE sElECTioN

Open the ‚SOURCE MENU', and then touch the option you desired
or select the option by moving the cursor and then confirm.

NoTE:
■ Playing source selection means selecting work mode, such as
DVD mode, Radio mode, Camera mode, etc.
■ When some devices are not ready respective not be connected,
they cannot be selected.

usiNg ThE TFT MoNiToR

Change the display mode

■ Press the [WIDE] key repeatedly on the front panel or on the
remote control.