Intended Use; Explanation Of Terms; Safety Notices - hanseatic WQP12-J7609D Gebrauchsanleitung

Page EN-6 Safety
Safety

Intended use

This dishwasher is designed exclusively
for rinsing ordinary household quanti-
ties of dishes. The appliance is intended
solely for domestic use.
Use the appliance exclusively as de-
scribed in this user manual. Any other use
is deemed improper and may result in
damage to property or even personal in-
jury. The manufacturer accepts no liabil-
ity for damage caused by improper use.

Explanation of terms

The following symbols can be found in
this user manual.
WARNING!
This symbol indicates a hazard with a
medium level of risk which, if not avoid-
ed, could result in death or serious in-
jury.
CAUTION!
This symbol indicates a hazard with a
low level of risk which, if not avoided,
could result in minor or moderate injury.
NOTICE
This symbol warns against possible
damage to property.
This symbol refers to useful addi-
tional information.

Safety notices

In this chapter you will fi nd general
safety instructions which you must al-
ways observe for your own protection
and that of third parties. Please also
observe the warnings in the individual
chapters on installation, fi tting and as-
sembly, etc.
Risks in handling household
electrical appliances
Risk of electric shock!
Touching live parts may result in severe
injury or death.
Only use the appliance indoors. Do
■
not use in wet rooms or in the rain.
Do not operate or continue to oper-
■
ate the appliance if
it shows visible signs of damage,
–
e.g. the power cord is defective.
it starts smoking or there is a smell
–
of burning.
it makes unfamiliar noises.
–
In this case, you should pull the mains
cord out of the socket or switch off/un-
screw the fuse and have the appliance
repaired (see „Service" on page EN-30).
Check whether any stipulations of
■
the responsible energy provider con-
cern the connection of dishwashers.
We recommend using a pulse-sensi-
tive residual-current device (RCD).
The appliance corresponds to pro-
■
tection class 1 and may only be con-
nected to a plug with a protective
conductor that has been installed
properly. Ensure that the voltage is
correct when connecting it. You can
fi nd more detailed information about
this on the nameplate.