Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Unit Specifications
Battery charger
AL 60 ..
Order number
2 607..
Voltage range of
chargeable
batteries
(automatic voltage
detection)
Charging current:
• Rapid charging
• Trickle charging
(approx.)
Allowable charging
temperature range [°C] 0 – 45
Charging time per
battery capacity
• 1.2 Ah
• 1.4 Ah
• 1.7 Ah
• 2.0 Ah
Weight (without
accessories)
approx.
Protection class
Please observe the order number of your charger.
The trade names of the individual chargers may vary.
Unit Elements
1 Battery pack (without contact APT)*
2 Unlocking button*
3 Adapter (not included in the delivery)*
4 Charge control LED
5 Charging compartment
6 Battery pack (with contact APT)
(AL 60 DV 2411)*
7 Battery pack (with contact APT)*
* Not all of the accessories illustrated or described are
included as standard delivery.
7 • 2 609 931 772 • 03.03
..DV 2411 ..DV 1419
.. 224 ...
.. 224 ...
[V=] 7.2 – 24
7.2 – 14.4
[A]
1.2
1.9
[mA] 60
80
0 – 45
[min] 70
45
[min] 80
50
[min] 100
60
[min] 120
71
[kg]
1.2
1.2
/ II
The unit must not be damp and must not be
used in a wet environment. Store the unit in a
dry and frost-free place.
Before each use of the unit, check the cable
and plug. If damage is detected, do not use the
unit. Have repairs performed only by a quali-
fied technician. Never open the unit yourself.
Do not charge batteries of other manufactur-
ers. The appliance is only suitable for charging
Bosch NTC (NiCd/NiMH) batteries with volt-
ages between 7.2 V–24 V (Type 2411) or
7.2 V–14.4 V (Type 1419).
The battery must be inserted properly into the
charging compartment/adapter, must have
contact and may not be obstructed by foreign
objects.
As the battery charger heats up during charg-
ing, the unit must not be operated on easily in-
/ II
flammable surfaces (e. g. paper, textiles, etc.)
or in combustible environments.
Keep the charging compartment 5 free of for-
eign objects and protect it from debris and
moisture.
Do not carry or hang up the unit by the cable.
Never allow children to use the unit.
Bosch is only able to ensure perfect operation
of the unit, if the original accessories intended
for it are used.
Initial Operation
Observe correct mains voltage: The voltage of
the power source must agree with the voltage
specified on the nameplate of the unit. Equipment
marked with 230 V can also be connected to
220 V.
English - 1
For Your Safety
Working safely with this unit is
possible only when the operat-
ing and safety information are
read completely and the instruc-
tions
contained
strictly followed.
therein
are
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
