PeakTech 1030 Bedienungsanleitung Seite 20

Low battery indication:
* Scenario 1 – Powering on the tester: The "power on" LED
in the tip of the tester changes from a steady green to a
blinking green and a series of beeping sounds is
generated. The tester then turns off. The unit is now
deactivated and is not operational; the batteries require
replacement. To replace the tester batteries refer to the
Maintenance section titled "Battery Replacement."
* Scenario 2 – Operating the tester: If the LED lights
become dim and the tone fades, the tester may require
new batteries. To replace the tester batteries refer to the
Maintenance section titled "Battery Replacement."
Auto Power Off:
* After 5 minutes of non-use, the tester automatically
powers off to conserve battery life. Listen for a double-
beep sound and watch the "power on" green LED turn off.
The tester is now deactivated and is not operational.
Flashlight Operating
* Press and hold the Flashlight ON/OFF button to turn on
Flashlight. Flashlight turned off once the Flashlight button
is released.
CAUTION!
Movement generates static voltages. The AC Voltage
Detector could react to this static voltages with short light of
the LED and short sound of the Buzzer. This behaviour is
normal and it isn't a defect of the instrument.
-19-