Backlight - auna Connect CD MKII Bedienungsanleitung

Sleep setting
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. Tap the SLEEP button on remote control, the sleep time icon"SLEEP"
appears on the display.
2. Repeatedly tap the SLEEP button to select a sleep time. The unit will
turn off after "Sleep off-15mins - 30mins - 45mins - 60mins" Wait for 3
seconds after your selection for the unit to confirm the selection, the unit
will play for the selected length of time then automatically turn off.
3. To cancel the sleep timer, tap the SLEEP button repeatedly until timer
shows "OFF", the sleep time icon "SLEEP" disappears on the display.
Changing your preferred language
You can select the language for menus and options.
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Language'.
3. Turn and press the NAVIGATE dial to select a menu language.

Backlight

You can adjust the duration that the screen is illuminated for and the
brightness of the screen when it times out.
To adjust the duration of the screen backlight before dimming:
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'Timeout'.
4. Turn and press the NAVIGATE dial to choose a timeout setting. To specify
that the backlight should always remain on, choose 'On'.
Power-on level
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'Power-On Level'.
4. Turn and press the NAVIGATE dial to choose between 'High', 'Medium'
or 'Low'.
EN
69