Network Profile - auna Connect CD MKII Bedienungsanleitung

Manually connecting your wireless network
Manually configure your wireless network (for advanced users only).
1. Press and hold the Menu button on main unit or remote control the
Settings menu
2. Turn and press the NAVIGATE dial or use the < OK > buttons to select
'Main menu' > 'System settings' > 'Network' > 'Manual settings'.
3. CNet Remote PIN Setup If you want to restrict the devices that can
connect using the Pure Select app, you can get request a PIN number
when you first connect.
To set up a pin number:
1. Press and hold the Menu button on main unit or remote control the
Settings menu.
2. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to select 'Main menu' >'System settings' > 'Network' >
'NetRemote PIN Setup'.
3. Enter your network key or password by turning and pressing the
NAVIGATE dial or use the < OK > buttons on the remote control to
highlight and select the numbers. If you want to delete the last number,
turn the NAVIGATE dial to select 'BKSP' and push to confirm.
4. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to select 'OK'. You will now need to enter this PIN
whenever you want to connect a new device using the Pure Select app.

Network profile

Every time you connect to a new Wi-Fi, Will store the connection
information as a profile so that if you plan to use In several locations, you
won't have to keep re-enter the Wi-Fi settings. Harvard stores the four most
recent Wi-Fi profiles and will try to connect to a Wi-Fi network using the
stored profiles. can't connect to the Wi-Fi using one of the stored profiles,
you will need to connect to your network using the wizard or manually.
If you think you will only visit a Wi-Fi connection once, you can delete the
profile by carrying out the following:
1. Press and hold the Menu button on main unit or remote control the
Settings menu
2. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to select 'Main menu' > 'System settings' > 'Network' >
'Network profile'.
3. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to choose the profile that you want to delete.
EN
65