Tools Required; Additional Resources - Danfoss VLT Decentral Drive FCD 302 Installationshandbuch

VLT® Decentral Drive FCD 302
Installation Guide
1 Instructions
1.1 Safety and Installation Awareness
Both an installation and a safety guide are provided with the VLT
yourself with all safety guidelines and precautions in the safety guide. Additional resources - including the operating guide and
design guide - can be downloaded at www.danfoss.com.

1.2 Tools Required

Table 1: Recommended Tools and Equipment
Equipment Size
Screwdrivers –
Socket (Hex) 8
Slotted 0.4x2.5
Slotted/Torx 1.0x5.5/TX20
Spanner 19, 24, 28
1.3 Verifying the Shipment and the Contents
Ensure that the items supplied and the information on the nameplate correspond to the order confirmation.
Decentral Drive
VLT®
www.danfoss.com
1
T/C: FCD302P1K5T4W66H1X1XMFCFXXXXA0BXXXXXXDX
2
P/N: 131Z5118 S/N: 000000G000
4
1.5kW(400V) / 2.0HP(460V)
5
IN: 3x380-480V 50/60Hz, 3.7/3.1A
6
OUT: 3x0-Vin 0-590Hz, 4.1/3.4A
7
IP66 Enclosure Tamb. 40 ˚C/104 ˚F
9
Illustration 1: Example nameplate
1 Type code
2 Ordering number
3 Serial number
4 Power rating
5 Input voltage, frequency, and current (at low/high
voltages)

1.4 Additional Resources

The full operating guide for VLT
drives.danfoss.com.
Danfoss A/S © 2022.02
Description
–
For fastening inverter screws/mounting of brackets
For spring loaded power and control terminals
For cable clamps inside the installation box
For blind-plugs
10
Enclosure rating:
Type 4X Indoor Use Only
LISTED E134261 76X1 IND. CONT. EQ.
3
8
Danfoss A/S
6430 Nordborg
Denmark
MADE IN DENMARK
Decentral Drive FCD 302 and the Safe Torque Off operating guide are available online at
®
Decentral Drive FCD 302. Before starting installation, familiarize
®
6 Output voltage, frequency, and current (at low/high
voltages)
7 Enclosure type and protection rating
8 Maximum ambient temperature
9 Certifications
10 Enclosure rating
Instructions
http://
AN40002114756602-0001 / 130R1238 | 3