Using The Personal Protective Equipment - Goldschmidt THERMIT SMARTWELD SPARK Bedienungsanleitung

SMARTWELD SPARK
» Be instructed in regular intervals about difficulties, hazards and
rules of conduct.
» Pay attention to personal safety and the safety of others, and to
orderliness and cleanliness when working with and using equipment.
» Always use the appropriate personal protective equipment to ensure
a safe work environment (see chapter 6.5).
6.5

Using the personal protective equipment

The electric Thermit
of the Thermit
protective clothing stated by Elektro-Thermit GmbH & Co. KG in the work
instructions for the Thermit
Always obey the provisions for use of the protective equipment. Otherwise,
hazards to persons and property may occur.
Always wear the following protective clothing when working with the electric
Thermit igniter SMARTWELD SPARK:
®
SYMBOL
40 40
OPERATION MANUAL
igniter SMARTWELD SPARK initiates the chemical reaction
®
portion. The required protective equipment is identical to the
®
welding procedure.
®
PROTECTIVE
EQUIPMENT
Protective work clothing
(protective wear for
welders in accordance
with EN 470-1, if necessary
hi-vis warning clothing in
accordance with EN 471)
Protective work shoes
(S3 safety shoes in
accordance with EN ISO
20345 ankle-height
shoes)
WORK
Transport, commissioning,
operation, decommis-
sioning, maintenance,
cleaning/care
Transport, commissioning,
operation, decommis-
sioning, maintenance