Introduction; Safety Information - OHAUS Valor 1000 -Serie Bedienungsanleitung

TM
Valor 1000 Series

1. INTRODUCTION

This manual contains installation, operation and maintenance instructions for the
TM
Ohaus Valor 1000 Series Scales. Please read the manual completely before
using the scale.

1.1 Safety Information

Definition of Signal Warnings and Symbols
Safety notes are marked with signal words and warning symbols. These show
safety issues and warnings. Ignoring the safety notes may lead to personal injury,
damage to the instrument, malfunctions and false results.
WARNING For a hazardous situation with medium risk, possibly resulting in severe
injuries or death if not avoided.
CAUTION For a hazardous situation with low risk, resulting in damage to the device
or the property or in loss of data, or minor or medium injuries if not
avoided.
ATTENTION For important information about the product. May lead to equipment
damage if not avoided.
NOTE For useful information about the product.
Warning Symbols
General
hazard
Safety Precautions
CAUTION: Read all safety warnings before installing, making
connections, or servicing this equipment. Failure to comply with these
warnings could result in personal injury and/or property damage. Retain
all instructions for future reference.
 Before connecting power, verify that the AC adapter's input voltage
range and plug type are Ð compatible with the local AC mains power
supply.

Do not position the equipment such that it is difficult to reach the
power connection.

Make sure that the power cord does not pose a potential obstacle or
tripping hazard.

Operate the equipment only under ambient conditions specified in
these instructions.

The equipment is for indoor use only.

Do not operate the equipment in wet, hazardous or unstable
environments.

Do not allow liquids to enter the equipment.
Explosion
hazard
EN-3
Electrical
shock hazard