Benning CM 3 Bedienungsanleitung Seite 11

Digital current clamp meter for
- AC current measurement
- DC current measurement
Index of Contents
1. Operating instructions
2. Safety instructions
3. Contents of delivery
4. Meter description
5. General Specifications
6. Environmental Conditions
7. Electrical Specifications
8. Measuring with BENNING CM 3
9. Maintenance
10. Environmental notice
1. Operating Instructions
This operating manual is intended for
- electrical professionals
­ ­­ qualified­electrotechnical­persons
The BENNING CM 3 is designed for measuring in dry conditions. It must not be
used on electrical circuits with a rated voltage greater than 600V (for details refer
to „Environmental Conditions" section).
The following symbols appear in this manual and on the BENNING CM 3:
Application around and removal from HAZARDOUS LIVE conduc-
tors is permitted.

This symbol indicates dangerous voltage.

This symbol indicates warnings and cautions to be observed when
using the BENNING CM 3 (refer to manual!).
This symbol on the BENNING CM 3 indicates that the BENNING

CM 3 has double insulation (Protection Class II).
This symbol appears in the display when the battery is low.
(DC) Direct current.
(AC) Alternating current.

Ground (voltage against earth)
Note
After unmark the adhesive label „Warnung..." (on battery compartment lid) the
English text appears.
09/ 2013
Operating Manual
BENNING CM 3
BENNING CM 3

11